Comprehensive Oral Diagnosis and Management for Women with Turner Syndrome.

Turner Syndrome (TS) is a rare genetic disorder that affects females when one of the X chromosomes is partially or completely missing. Due to high genetic and phenotypic variability, TS diagnosis is challenging and is often delayed until adolescence, resulting in poor clinical management. Numerous oral, dental and craniofacial anomalies have been associated with TS, yet a comprehensive description is still lacking. This study addresses this gap through a detailed analysis of oral health and craniofacial characteristics in a cohort of 15 females with TS and their first-degree relatives. Subjects with TS ranged from 3 to 48 years old, none showed evidence of periodontal disease and only the youngest was in mixed dentition. Using the Multifunction System, we identified an aggregation of multiple signs and symptoms in each TS subject, including tooth anomalies (supernumerary molars, agenesis, microdontia, enamel defects, alterations in eruption patterns -advanced and delayed for chronological age-, crowding, rotations and transpositions), malocclusion (class II/1 and II/2) and Class II facial profile, while relatives exhibited fewer manifestations. The early detection of these signs and symptoms is crucial for appropriate referral and the optimal clinical management of TS, especially during the critical period of 9 to 10 years when congenital dental anomalies appear. The use of an established taxonomy to describe these phenotypic features is essential for early detection. Multidisciplinary teams are required to ensure holistic care management in rare diseases like TS.

Preload and Removal Torque of Two Different Prosthetic Screw Coatings-A Laboratory Study.

This study aimed to evaluate the effect of two coating materials, a silicone sealing gel and a polytetrafluoroethylene (PTFE) tape, on the screw preload and removal torque value (RTV) to develop strategies to prevent prosthetic screw loosening. We examined 45 complexes comprising an implant, abutment, and prosthetic screw, of which 15 samples were uncoated, 15 were coated with GapSeal® (Hager & Werken GmbH & Co., Duisburg, Germany), and 15 were coated with PTFE tape (MIARCO®, Valencia, Spain). The screws were tightened to register the preload and then untightened to register the RTV. The preload values showed a statistically significant difference only in the PTFE group, suggesting that this lubricant negatively affects the preload. The RTVs showed statistically significant differences among all groups, with the GapSeal® group and PTFE group showing the highest and lowest values, respectively. It can be concluded that the application of the PTFE tape on the screw significantly reduced the preload and RTV. The silicone sealing gel did not affect the preload but increased the RTV. Therefore, the use of GapSeal® should be considered to prevent prosthetic screw loosening, while the use of PTFE tape should be avoided.

O-HEALTH-EDU: A viewpoint into the current state of Oral Health Professional education in Europe: Part 1: Programme-level data.

INTRODUCTION: Current legislation leaves Oral Health Professional (OHP) education open to wide interpretation and may result in significant variation in educational practice and resultant professional attributes across Europe. Data regarding the current state of OHP education across Europe is limited. The aim of Part 1 of this series is to provide programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education. METHODS: A 91-item questionnaire was developed following the Delphi method. The questionnaire and the Articulate glossary of OHP education terms were developed concurrently to facilitate a common understanding of language. Piloting was performed in multiple stages and included institutions internal and external to the research group. The questionnaire was uploaded online and converted to a data hub, allowing dental schools to control their own data and update the data provided whenever they wish. All ADEE member schools (n = 144) were invited to provide data. Forty questions relating to school details, Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education were included in this part of the series. RESULTS: Seventy-one institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Programme-level data for Primary Dental Degree Programmes, Dental Hygiene and Postgraduate Education is presented including programme length, funding, languages and fees, student numbers and demographics, student admission and selection processes and permission to practice after graduation. CONCLUSION: This series of papers, as far as the authors are aware, are the first attempts to build a comprehensive picture of the current state of OHP education in Europe. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

O-Health-Edu: A viewpoint into the current state of oral health professional education in Europe: Part 2: Curriculum structure, facilities, staffing and quality assurance.

INTRODUCTION: Oral health professional (OHP) education is likely to vary across Europe in accordance with an EU directive that is open to broad interpretation. It is not clear how OHP curricula are structured or delivered across Europe. The objectives of Part 2 of this paper series are: (i) to provide an overview of common practices in curriculum structure, the availability of facilities, staffing (faculty) and quality assurance processes and (ii) to consider how the existing programme structures align to stakeholder guidance documents. METHODS: A total of 27 questions from a 91-item questionnaire were used for this manuscript. The questionnaire was developed following the Delphi method to establish consensus from a group of experts. Members of the research team and colleagues from other countries in Europe completed a multi-step piloting process. An online data hub was created to allow the respondents to be data controllers and respond to the questionnaire. ADEE member schools (n = 144) were invited to provide data. RESULTS: Totally, 71 institutions from 25 European countries provided data between June 2021 and April 2023, which represents a response rate of 49.3% of ADEE members. Data on curriculum approaches, teaching methods, integration of topics of interest, clinical education, staff-student ratios, access to facilities and new technologies, teaching staff (faculty) and quality assurance processes are presented for Primary Dental Degree Programmes. CONCLUSION: To the best of our knowledge, this series of papers are the first attempts to provide a comprehensive overview of OHP education in Europe. Results showed that the majority of European dental programmes are engaged in providing innovative and scientifically grounded education in order to develop quality future OHPs. Nevertheless, significant variability in the delivery of clinical education across the European OHP schools was notable in this dataset. A comprehensive view of the state of OHP education in Europe is not yet available but the O-Health-Edu data hub provides a means for all education providers in Europe to contribute data to reach this goal. It is anticipated that the data hub will be updated and built upon over time to continually establish a clearer picture of the state of OHP education in Europe.

ARTICULATE: A European glossary of terms used in oral health professional education.

INTRODUCTION: The Erasmus+O-Health-EDU project aims to gain a comprehensive view of oral health professional (OHP) education in Europe, through the development of web-based surveys and online toolkits. A glossary to facilitate a common language through which academic teams could cooperate and communicate more accurately was identified as a key need within the project. The aim of ARTICULATE was thus to create a shared language, with a European focus, for terms and concepts used in the field of OHP education. METHODS: The methodology was developed from those published for construction of other glossaries with a circular and iterative process: the creation of content and definitions by a group of experts in OHP education, the testing of "fitness for purpose" of the content, and stakeholder consultation. All creation steps were followed by refinements based on testing results and stakeholder comments. The final glossary was then launched as an online resource including a built-in mechanism for user feedback. RESULTS: The scope and structure of the glossary were mapped out at a workshop with 12 dental education experts from 7 European countries. A total of 328 terms were identified, of which 171 were finally included in ARTICULATE. After piloting with a close group of other colleagues, the glossary was opened for external input. Thirty European Deans or Heads of Education assessed the definition of each term as "clear" or "not clear." A total of 86 definitions were described as "clear" by all individuals. Terms deemed unclear by at least one individual were revisited and changes made to 37 of the definitions. In conjunction with the launch of the glossary, a range of stakeholder organisations were informed and asked to participate in an open global consultation by providing feedback online. Since its launch in June 2021, the ARTICULATE website (https://o-health-edu.org/articulate) has had an average of 500 visits/month. To promote community ownership, forms embedded on the ARTICULATE webpage allow users to give feedback and suggest new terms. A standing taskforce will meet regularly to consider amendments and make changes to ensure that the glossary remains a relevant and up-to-date resource over time. CONCLUSION: ARTICULATE is a unique, evolving, online glossary of terms relating to OHP education, created as a resource for all interested OHP educators. The glossary is a key output of the O-Health-Edu project, which relies on a comprehensive vision of OHP education to address the future oral health needs of the European population.

O-Health-Edu: A vision for oral health professional education in Europe.

This consensus paper reports on the process of developing a renewed vision for Oral Health Professional (OHP) education across Europe, and forms part of a larger EU-funded collaborative Erasmus+ project, "O-Health-Edu." The vision aligns with the World Health Organisation milestones (2016) and resolutions (2021), and EU4Health programme (2020) objectives - and projects 20 years into the future, to 2040. This longitudinal vision takes a multi-stakeholder perspective to deliver OHP education that acts in the best interests of both students and patients, and sits within the context of a wider strategy for general health. Included, it is an infographic to help communicate the vision to various stakeholders of OHP education.

Declarative knowledge in oral health: The case of the term 'centric occlusion'.

INTRODUCTION: The lack of academic agreement in the practical or clinical use of declarative knowledge can generate unnecessary confusion and miscommunication. The concept Centric Occlusion (CO) is part of the body of declarative knowledge in dentistry, but its definition remains unclear. OBJECTIVE: To ascertain the CO concept in articles published in dental journals as a study case for the dentistry "corpus" of declarative knowledge. METHODOLOGY: The alternative definitions of CO used by the GPT (Glossary of Prosthodontic Terms) from 1956-1977, 'CO as a synonym for maximum intercuspal contact (MIC)', or by the GPT from 1987-2017, 'CO may or may not coincide with MIC', were searched in the articles. The association between the CO definition used and variables such as article aims, journal scope and authors specialty was assessed. RESULTS: Eight hundred and twelve articles were analysed. The widespread use of CO as synonym of MIC was the main finding and was significantly associated to the Orthodontics field. The CO definition according to the GPT 1987-2017 was less frequently observed but appeared in all dentistry fields, showing a significant association with the Oral Rehabilitation field. The difficulty of incorporating the current definition of CO (by GPT) into the main clinical discussions was evidenced all the long of the review process. CONCLUSION: The lack of consensus in the concept use was confirmed by the present study case, showing the influence of specific fields in Oral Health declarative knowledge. This methodology can provide a tool to the academy to assess controversial terms or concepts in Oral Health education, thus facilitating the critical and reflexive learning by students.

Comparison of two different lingual flap advancement techniques and vascular structure identification: a human cadaver study

Background: One of the most frequent complications in guided bone regeneration (GBR) is wound dehiscence, which compromises treatment outcomes. Thus, primary tension-free suture is essential to avoid wound dehiscence. The purpose of this study was to compare the extension of 2 different mandibular flaps in human cadaveric specimens, and to measure the size of the supraperiosteal blood vessels. Material and methods: Five freshly unfrozen human cadaveric specimens were used. Arteries and veins were marked and bilateral classical lingual flaps (extending from the second premolar to the retromolar area) were prepared. In one side, the mylohyoid muscle was detached to increase the coronal extension of the flap. An implant drill was used to measure the extension of the flap after exerting 30 g of traction, before and after detaching the mylohyoid muscle. The size of the largest vascular structures of the flap was measured using a periodontal probe. Results: The classical flap extension was 5.99 mm (95% confidence interval (CI): 5.08 to 6.90), while the coronally advanced flap extension with mylohyoid muscle detachment was 14.96 mm (95%CI: 10.81 - 19.11). A statistically significant difference was found between the 2 groups (p= 0.0002), with a mean extension difference was 8.97 mm (95%CI: 5.02 to 12.91). The mean largest artery had 0.20 mm of diameter (95%CI: 0.15 - 0.26). Conclusions: The detachment of the mylohyoid muscle from the lingual flap allows to significantly increase its extension by 2.5 times. The superficial arteries found in the lingual flap have a small diameter (around 0.2mm). (AU)

Moderate and Severe Dental Fluorosis in the Rural Population of Anantapur, India: Change in Their Biological Susceptibility?

Dental fluorosis affects the quality of life. A cross-sectional, observational study was conducted in a community affected by endemic fluorosis for several generations with a conserved biological and social environment. The study included patients from the rural population of Anantapur, India. The Dean index (DI) and the Thylstrup and Fejerskov Index (TFI) were used for fluorosis classification. Additionally, water samples were collected for fluoride analysis, taken from the patients' living areas. The statistical association between the variables was analyzed. In total, 785 patients between 10 and 60 years old were included in the study (58.7% women and 41.3% men). Fluorosis signs were found in 94.6% of patients examined using the DI and 94.4% using the TFI. Moderate-severe dental fluorosis was observed in 62.8% by DI and 73.1% by TFI consuming untreated water with up to 2.9 ppm of fluoride. Furthermore, moderate-severe dental fluorosis was observed in 33.2% by DI and 39.9% by TFI consuming water with ≤1.5 ppm of fluoride. The high prevalence of moderate-severe dental fluorosis in patients consuming water with a low fluoride concentration suggests that other factors are involved. Biological susceptibility change could play an essential role in the severity of dental fluorosis in populations exposed for several generations, affecting its actual and future quality of life.

Human Amnion Epithelial Cells: A Potential Cell Source for Pulp Regeneration?

The aim of this study was to analyze the suitability of pluripotent stem cells derived from the amnion (hAECs) as a potential cell source for revitalization in vitro. hAECs were isolated from human placentas, and dental pulp stem cells (hDPSCs) and dentin matrix proteins (eDMPs) were obtained from human teeth. Both hAECs and hDPSCs were cultured with 10% FBS, eDMPs and an osteogenic differentiation medium (StemPro). Viability was assessed by MTT and cell adherence to dentin was evaluated by scanning electron microscopy. Furthermore, the expression of mineralization-, odontogenic differentiation- and epithelial-mesenchymal transition-associated genes was analyzed by quantitative real-time PCR, and mineralization was evaluated through Alizarin Red staining. The viability of hAECs was significantly lower compared with hDPSCs in all groups and at all time points. Both hAECs and hDPSCs adhered to dentin and were homogeneously distributed. The regulation of odontoblast differentiation- and mineralization-associated genes showed the lack of transition of hAECs into an odontoblastic phenotype; however, genes associated with epithelial-mesenchymal transition were significantly upregulated in hAECs. hAECs showed small amounts of calcium deposition after osteogenic differentiation with StemPro. Pluripotent hAECs adhere on dentin and possess the capacity to mineralize. However, they presented an unfavorable proliferation behavior and failed to undergo odontoblastic transition.

Comparison of the Masticatory Force (with 3D Models) of Complete Denture Base Acrylic Resins with Reline and Reinforcing Materials.

The reinforcement of acrylic denture base remains problematic. Acrylic prosthesis fractures are commonly observed in prosthodontic practice and have not been reliably resolved. This study compared the resistance to masticatory force of acrylic bases of removable complete conventional prosthesis in 3D upper models. Forty acrylic base test specimens containing two types of reinforcement meshes (20 with glass fiber meshes (FIBER-FORCE®- Synca, Bio Composants MédicauxTM, Tullins, France), 20 with metal meshes (DENTAURUM®-Ispringen, Germany)), 20 with a conventional PMMA acrylic base (LUCITONE 199®-Dentsply Sirona, York, PA, USA), and 20 using a permanent soft reline material (MOLLOPLAST-B®-DETAX GmbH & Co. KG, Ettlingen, Germany) were tested-a total of 80 specimens. Half of the specimens were made for a low alveolar ridge and half for a high alveolar ridge. The data were analysed using one-way analysis of variance and Student's t-test for independent test specimens. In the high-alveolar-ridge group, the prosthesis reinforced with the glass fiber mesh was the most resistant to fracture, while in the low-alveolar-ridge group, the non-reinforced prosthesis showed the highest resistance masticatory force. Prostheses with the permanent soft reline material showed the lowest resistance to fracture in both high and low-alveolar-ridge groups. The results show that the selection of the right reinforcement material for each clinical case, based on the height of the alveolar ridge, may help to prevent prosthesis fractures.

Correction Power of Percutaneous Adductor Tendon Release (PATR) for the Treatment of Hallux Valgus: A Cadaveric Study.

Osteotomies are commonly used in order to correct hallux valgus deformity. However, soft tissue structures also play an essential role in the etiology, progression, and treatment of hallux valgus (HV). The purpose of the present study was to analyze the correcting power (varus), reduction strength (sesamoid) and rotation of metatarsal and proximal phalanx after percutaneous adductor tendon release (PATR). To date, no study addresses this issue. Eleven cadaveric fresh-frozen below-the-knee cadaveric lower limbs with associated hallux valgus deformity were used. These specimens were subjected to a constant abduction force after PATR. HV and intermetatarsal angles showed statistically significant differences when comparing the preoperative and postoperative periods. PATR showed to be a reliable technique as the adductor tendon was completely released in 9 cases, and 75% released in the remaining 2 feet. The study supports that PATR provides powerful and quantifiable correction of HV deformity and can be accurately performed percutaneously.

Body Donation, Teaching, and Research in Dissection Rooms in Spain in Times of Covid-19.

The state of alarm due to Covid-19 pandemic in Spain stopped all educational and most university research activities. The Spanish Anatomical Society (SAE) Consensus Expert Group on Body Donations piloted a study based on a questionnaire to know the status of body donations and dissection activities during the lockdown, as well as the future implications of Covid-19 pandemic for body donation programs and anatomy teaching. The questionnaire results show that Spanish Universities refused body donations and stopped all dissection research and teaching. The Covid-19 expected influence on anatomy teaching was referred to the increase in teaching workforce and resources required to apply the new safety measures to future practical activities, as well as to prepare and adapt teaching material for online-only programs. The application of reinforced safety measures was expected to be perceived by the respondent's students as a gain in teaching quality, while the transformation of the anatomy courses in online-only programs will be perceived as a quality decrease. The respondent's concerns about future institutional implications of the pandemic were related to increased costs of the adaptation of the facilities and the reinforced preventive measures, as well as the eventual decrease in donations. The complete lockdown applied to dissection rooms was not justified by scientific evidence and represented a break of the confidence deposed in the institutions by the donors. A consensus is required for the adoption of a renewed, comprehensive protocol for present and future body donations including the evidence Covid-19 pandemic has contributed to create.

Micro-computed tomographic analysis of apical foramen enlargement of mature teeth: a cadaveric study / Análisis mediante micro-CT del ensanchamiento del foramen apical de dientes maduros: un estudio cadavérico

Revitalization procedures have been extensively studied during the last decade and offers several advantages over root canal treatment, such as the recovery of the natural immune system. Mature teeth have a small apical foramen diameter (AFD), which could impair the ingrowth of tissue into the root canal. We analysed three methods for apical foramen enlargement by instrumentation in in situ human teeth and evaluated the damage over hard tissues produced by the techniques. Tooth length (TL), defined as the length from the most coronal part of the crown to the point at which the file abandons the root canal, was calculated. Forty-four in situ teeth were randomized: Group I: instrumentation 0.5 mm coronal to TL; Group II: at TL level; Group III: 0.5 mm beyond TL. Teeth were instrumented up to K-file #80. The mandibles were scanned in a micro-CT device before and after treatment. Group I: Only 20 % of teeth presented an enlarged AFD, with augmentation of 0.09 mm. No damage to hard tissues was observed. Group II: 71.4 % of the teeth presented an enlarged AFD with augmentation of 0.42 mm. 35.7 % presented damage to periapical tissues. Group III: 86.7 % presented an enlarged AFD with augmentation of 0.43 mm. 46.7 % presented damage to periapical tissues. All groups presented similar prevalence of teeth with dentine thickness less than 1mm. All mandibular incisors presented areas of thickness less than 1mm. Instrumentation 0.5 mm beyond TL is the most effective technique.

La revitalización de dientes necróticos ha sido ampliamente estudiada durante la última década y ofrece varias ventajas sobre la endodoncia convencional, tal como la recuperación del sistema inmunitario natural del diente. Los dientes maduros tienen un diámetro de foramen apical (FA) pequeño, lo que podría afectar el crecimiento de tejido en el conducto. Se evaluaron tres métodos para la ampliación del foramen apical en dientes humanos in situ y se evaluó el daño sobre los tejidos duros producidos por las técnicas. Mediante radiografía periapical se calculó la longitud del diente (TL), definida como la longitud desde la parte más coronal de la corona hasta el punto en que la lima abandonó el conducto radicular. En el estudio fueron aleatorizados 44 dientes in situ: Grupo I: instrumentación 0,5 mm coronal a TL; Grupo II: a nivel TL; Grupo III: 0,5 mm más allá de TL. Los dientes fueron instrumentados hasta la lima K #80. Las mandíbulas se escanearon en un dispositivo de microCT antes y después del tratamiento. Grupo I: solo el 20 % de los dientes presentaron un diámetro de FA ensanchado, con un aumento de 0,09 mm. No se observó daño a los tejidos duros. Grupo II: el 71,4 % de los dientes presentaban un FA ensanchado con un aumento de 0,42 mm. El 35,7 % presentó daño a los tejidos periapicales. Grupo III: el 86,7 % presentó un FA ensanchado con un aumento de 0,43 mm. El 46,7 % presentó daño a los tejidos periapicales. Todos los grupos presentaron una prevalencia similar de dientes con un espesor de dentina inferior a 1mm. Todos los incisivos mandibulares presentaban áreas de grosor inferior a 1mm. La instrumentación 0,5 mm más allá de TL es la técnica más efectiva, aunque se debe tener especial consideración en aspectos como el debilitamiento de la estructura dentaria.

Relation between muscle architecture and first metacarpal morphology, and its implications for human hand evolution.

Previous studies have proposed that our ability to produce and use stone tools was the primary selective pressure explaining the evolution of the human hand. Derived traits in humans include a robust first metacarpal and longer thumbs relative to the other fingers. Along with other anatomical peculiarities, humans can exert forceful precision and have powerful grips, and can resist loads during tool production and use. Despite this biomechanical explanation for the morphology of the human hand, limited work has been done on the soft tissue and, therefore, the relationship between the hand bones and the muscles most heavily relied upon during tool-related behaviours still requires thorough investigation. For this purpose, we have dissected 23 forearms and hands of fresh human cadavers of known sex and age at death, and dissected all the muscles attached at the first metacarpal (the first dorsal interosseous, opponens pollicis, and abductor pollicis longus muscles). Variations in physiological cross-sectional area, muscle mass, and fibre length were compared with metacarpal anatomy. In no case bone traits were a significant predictor of muscle features. In contrast, sex and age predicted muscle architecture in several cases, thus substantially affecting the functional analysis based on linear measurements of this bone. The data, therefore, failed to provide a deductive framework for predicting muscle recruitment based on measurements of bone from the fossil record.

The lateral fibulotalocalcaneal ligament complex: an ankle stabilizing isometric structure.

PURPOSE: Ankle lateral collateral ligament complex has been the focus of multiple studies. However, there are no specific descriptions of how these ligaments are connected to each other as part of the same complex. The aim of this study was to describe in detail the components of the lateral collateral ligament complex-ATFL and CFL-and determine its anatomical relationships. METHODS: An anatomical study was performed in 32 fresh-frozen below-the-knee ankle specimens. A plane-per-plane anatomical dissection was performed. Overdissecting the area just distal to the inferior ATFL fascicle was avoided to not alter the original morphology of the ligaments and the connecting fibers between them. The characteristics of the ATFL and CFL, as well as any connecting fibers between them were recorded. Measures were obtained in plantar and dorsal flexion, and by two different observers. RESULTS: The ATFL was observed as a two-fascicle ligament in all the specimens. The superior ATFL fascicle was observed intra-articular in the ankle, in contrast to the inferior fascicle. The mean distance measured between superior ATFL fascicle insertions increases in plantar flexion (median 19.2 mm in plantar flexion, and 12.6 mm in dorsal flexion, p < 0.001), while the same measures observed in the inferior ATFL fascicle does not vary (median 10.6 mm in plantar flexion, and 10.6 mm in dorsal flexion, n.s.). The inferior ATFL fascicle was observed with a common fibular origin with the CFL. The CFL distance between insertions does not vary with ankle movement (median 20.1 mm in plantar flexion, and 19.9 mm in dorsal flexion, n.s.). The inferior ATFL fascicle and the CFL were connected by arciform fibers, that were observed as an intrinsic reinforcement of the subtalar joint capsule. CONCLUSION: The superior fascicle of the ATFL is a distinct anatomical structure, whereas the inferior ATFL fascicle and the CFL share some features being both isometric ligaments, having a common fibular insertion, and being connected by arciform fibers, and forming a functional and anatomical entity, that has been named the lateral fibulotalocalcaneal ligament (LFTCL) complex. The clinical relevance of this study is that the superior fascicle of the ATFL is anatomical and functionally a distinct structure from the inferior ATFL fascicle. The superior ATFL fascicle is an intra-articular ligament, that will most probably not be able to heal after a rupture, and a microinstability of the ankle is developed. However, when the LFTCL complex is injured, classical ankle instability resulted. In addition, because of the presence of LFTCL complex, excellent results are observed when an isolated repair of the ATFL is performed even when an injury of both the ATFL and CFL exists.

Combining radial point interpolation meshless method with a new homogenization technique for trabecular bone multiscale structural analyses.

PURPOSE: Bone tissue is a dynamic tissue, possessing different functional requirements at different scales. This layered organization indicates the existence of a hierarchical structure, which can be characterized to distinguish macro-scale from micro-scale levels. Structurally, both scales can be linked by the use of classic multiscale homogenization techniques. Since in bone tissue each micro-scale domain is distinct form its neighbour, applying a classic multiscale homogenization technique to a complete bone structure could represent an inadmissible computational cost. Thus, this work proposes a homogenization methodology that is computationally efficient, presenting a reduced computational cost, and is capable to define the homogenized microscale mechanical properties of the trabecular bone highly heterogeneous medium. METHODS: The methodology uses the fabric tensor concept in order to define the material principal directions. Then, using an anisotropic phenomenological law for bone tissue correlating the local apparent density with directional elasticity moduli, the anisotropic homogenized material properties of the micro-scale patch are fully defined. To validate the developed methodology, several numerical tests were performed, measuring the sensitivity of the technique to changes in the micro-patch size and preferential orientation. RESULTS: The results show that the developed technique is robust and capable to provide a consistent material homogenization. Additionally, the technique was combined with two discrete numerical techniques: the finite element method and radial point interpolation meshless method. CONCLUSIONS: Structural analyses were performed using real trabecular patches, showing that the proposed methodology is capable to accurately predict the micro-scale patch mechanical behavior in a fraction of the time required by classic homogenization techniques.

Immediate small-diameter implants as abutments for an overdenture in the edentulous atrophic mandible: report of immersion endoscopic bone in vivo, and histologic bone-implant evaluation after 6 months of function / Implantes de pequeño diámetro como soporte inmediato de sobredentaduras en hueso alveolar mandibular atrófico: reporte de endoscopía de inmersion in vivo y evaluación histológica a los 6 meses de función

The aim of this report was to endoscopically evaluate bone quality in vivo in the immediate installation of temporary small-diameter implants, and again after 6 months of function, through an attachments system for overdenture, in the atrophic mandible of a patient. We also histologically evaluated bone-implant interaction in these temporary small-diameter implants, once the success of the osseointegration of the submerged implants was guaranteed. A patient received a total of 6 implants in the atrophic mandible, two of which were immediately loaded with a provisional prosthesis, and four were left to heal in a submerged way. Further, an immersion endoscopic evaluation was performed during bone drilling, and this showed a compact bone structure with limited vascularization and predominantly cortical structure.This immediate loading protocol involving an overdenture retained by two small-diameter implants of 2.9 mm in the atrophic mandible proved to be successful after 6 months of loading. Clinical and histologic osseointegration was consistently achieved for both of the retrieved immediately loaded implants. This modality allows the patient to be restored with a stable, functional, and aesthetic prosthesis during the osseointegration period of submerged implants and soft-tissue healing, before the removal of the provisional implants. The histological evaluation of bone-implant contact found that the space between the implant threads closer to the surface was filled with woven bone and lamellar bone, but the tissue in contact with the cervical portion of the implants was compatible with cortical bone organization. Also, the newly formed bone has a regular cell distribution and characteristics of advanced maturation after 6 months of function in the atrophic mandible. Anchored overdentures in 2 to 4 small-diameter implants (2.9 mm) for edentulous patients with severe atrophy of the mandible with cortical bone would be a minimally invasive alternative.

Multicenter study of patients' preferences and concerns regarding the origin of bone grafts utilized in dentistry.

PURPOSE: Bone graft materials can be obtained from the patient's own body (autologous graft), animals (xenograft), human cadavers (allograft) and synthetic materials (alloplastic bone graft). Patients may have ethical, religious or medical concerns about the origin of bone grafts, which could lead them to reject the use of certain types of bone graft in their treatments. The aim of this multicenter study, which surveyed patients from five university clinics in Portugal, France, Italy, Spain and Chile, was to analyze patients' opinions regarding the source of bone grafts. PATIENTS AND METHODS: A survey composed of ten questions was translated into local languages and validated. Patients were asked about the degree of acceptance/rejection of each graft and the reasons for rejection. A chi-squared test was used to analyze statistically significant differences. RESULTS: Three hundred thirty patients were surveyed. The grafts that elicited the highest percentage of refusal were allograft (40.4%), autologous bone graft from an extraoral donor site (34%) and xenograft (32.7%). The grafts with the lowest rate of refusal were alloplastic (6.3%) and autologous bone grafts from an intraoral donor site (24.5%). The main reason for autologous bone rejection was the fear of pain and discomfort, for xenograft it was the fear of disease transmission and the rejection of use of animals for human benefit, and for allograft it was ethical/moral motivations and the fear of disease transmission. Religious affiliation influenced patient's preferences. CONCLUSION: The origin of bone grafts is still conflictive for a high percentage of patients.

Percutaneous, Intra-articular, Chevron Osteotomy (PeICO) for the Treatment of Hallux Valgus: A Cadaveric Study.

BACKGROUND: Percutaneous surgery is experiencing sustained growth based on third-generation techniques. This cadaveric study was designed with the main goal of exploring the risk of iatrogenic tendon and neurovascular lesions and defining the safe zones in a percutaneous, intra-articular, chevron osteotomy (PeICO) procedure, as well as assessing the accuracy of the osteotomy itself. METHODS: Eight feet from below-knee fresh-frozen specimens were selected. After the procedure, the specimens were dissected, and structures were inspected for damage. RESULTS: The results of the safety measurements were as follows: (1) distance between portal 1 (P1) and the lateral border of the extensor hallucis longus (EHL) tendon: average 17.6 mm (range 12.7-21.3); (2) distance between P1 and the dorsomedial digital nerve (DMDN): average 7.2 mm (range 1.6-10.4); (3) distance between P1 and the metatarsophalangeal joint: average 15.7 mm (range 9.4-20.5); distance between portal 2 (P2), or the osteosynthesis portal, and the metatarsophalangeal joint: average 25.5 mm (range 22-30.4); distance between P2 and the lateral border of the EHL tendon: average 12.7 mm (range 8-16.7); and distance between P2 and the DMDN: average 4.1 mm (range 1.7-8.2). There were no iatrogenic injuries. The osteotomy angulation in the sagittal plane (reproducibility) average was 85.6 degrees. CONCLUSION: There were no iatrogenic injuries on this cadaveric study of PeICO. CLINICAL RELEVANCE: This study will help orthopedic surgeons understand the risks of performing percutaneous surgery by mimicking an accepted open technique (chevron).